Cruise control and speed limiter
Cruise control maintains a desired driving speed constantly starting at around 30km/h, provided it can be maintained by engine power and engine braking effects. This offers relief to drivers especially on long trips. While also, contributing towards lower fuel consumption and lower CO₂ emissions due to the constant speed mode.
To activate the system, locate the separate steering column stalk, below the signal indicator.
Pull the stalk towards you to activate the cruise control.
When you’ve reached the desired set speed, push the button at the edge of the stalk to activate it. To cancel, apply the brake or push the stalk away from you.
If you would like to resume on the speed set earlier, pull the stalk towards you and it will resume the set speed.
The configurable speed limiter on the other hand, limits driving speed to a value set by the driver within the speed range of 30 to 250 km/h.
To activate the system, locate the separate steering column stalk, below the signal indicator.
Pull the stalk towards you to activate the cruise control.
Press the "LIM" button on the stalk and then press the button at the edge of the stalk to activate it. This will set the speed first at 30 km/h, push the stalk upwards to increase the speed to reach the desired speed to set the limit to. Pushing the stalk all the way to the edge will increase the speed by 10km/h each turn. To decrease the speed, pull the stalk downwards.